14
BEFORE OPERATION
OPERATION OF REMOTE CONTROL
This Remote Control emits a laser beam as laser pointer function from the Laser Light Window. When the LASER button is
pressed, laser light goes on. And when the LASER button is being pressed for more than 1 minute or the LASER button is
released, light goes off. The LASER POINTER INDICATOR lights RED and Laser is emitted with RED light to indicate laser
beam is being emitted.
The Laser emitted is a class
II
laser; therefore, do not look into the Laser Light Window or shine the laser beam on yourself or
other people. Three marks below are caution labels for laser beam.
CAUTION
: Use of controls, adjustments or performance of procedures other than those specified herein may result
hazardous radiation exposure.
Laser Light Window
These caution labels are put on remote control.
LASER POINTER FUNCTION
LASER POINTER INDICATOR
FOCUS BUTTON
Used to adjust focus. (P20)
AUTO PC ADJ. BUTTON
Use to operate AUTO PC
Adjustment function. (P25)
KEYSTONE BUTTON
Used to correct keystone
distortion. (P20, 36)
IMAGE BUTTON
Used to select image level.
(P28, 33)
LOCK
FREEZE
SELECT
D.ZOOM
MUTE
VOLUME-
MENU
NO SHOW
IMAGE
KEYSTONE
LASER
P-TIMER
ZOOM
COMPUTER
VIDEO
FOCUS
AUTO PC ON-OFF
ON
ALL OFF
ALL-OFF SWITCH
Left Side
When using the Remote Control,
turn this switch to “ON.” And turn it
to “ALL OFF” when it is not used.
POWER ON-OFF BUTTON
Used to turn the projector
on or off. (P19)
LASER BUTTON
Used to operate Laser
Pointer function. Laser
beam is emitted while
pressing this button within
1 minute.
When using this Laser
Pointer for more than 1
minute, release the LASER
button and press it again.
The indicator lights red
while the laser beam is
emitted from Laser Light
Window. It lights green in
drag ON position. (P40)
LASER POINTER (Drag ON)
INDICATOR
MUTE BUTTON
Used to mute sound. (P21)
SW1 SW2 SW3 Code No.
DIP SWITCH SETTING
SW4 ........ LASER ON/OFF
4
ON
3
2
1
Code 1
ON
ON
Code 1
ON
Code 4
ON
OFF
Code 2
ON
OFF
Code 3
ON
ON
Code 5
OFF
ON
Code 6
OFF
OFF
Code 7
OFF
ON
Code 8
OFF
ON
OFF
ON
OFF
ON
ON
OFF
OFF
OFF
DIP SWITCH IN THE BATTERY
COMPARTMENT
The SW4 is used for laser pointer
on/off switching. SW1-3 is used to
change the Remote Control code. Set
each switch as shown in the table
below. Refer to the menu item
"Remote control" in the SETTING
Menu on page 37.
See page 40 for details.
COMPUTER MOUSE
OPERATION BUTTONS
