Eiki EK-308U, Руководство пользователя

Страница: 46 / 84

46
Expand

Note:
● Either "H/V Keystone" , "Corner correction" or "Curved correction" setting value is valid. When
the "H/V Keystone" , "Corner correction" or "Curved correction" adjustment is finished, the
adjusted value will be reset when you adjust the other one.
● The "Curved Correction X Offset" and the "Curved Correction Y Offset" can not be adjusted
independently. After adjusting the "Curved Correction X/Y Gain" at the beginning, please adjust
the "Curved Correction X Offset" and "Curved Correction Y Offset".
● Press the KEYSTONE button on the remote control when the keystone screen is displaying
(it
includes: H/V Keystone, Corner correction, Curved correction and Reset value), press

button
switch to the other adjustment screen.
● Correcting up to ±30° for the tilt in the vertical direction and ±15° for the tilt in the horizontal
direction are available for adjustments with "Keystone". However, the image quality will degrade
and it will get harder to focus with more correction. Install the projector so that the correction will
be as small as possible.
● Screen size will also change when "H/V Keystone" is used to perform various adjustments.
● Aspect ratio of the image size may shift depending on the correction.
Curved correction (For WXGA model only)
Adjust when the linearity is not uniform or the vertical and horizontal lines are distorted.
Press▲▼◄►to adjust the item.
Reset value
Return the corrected values to the factory default values.
Press▲▼to select "Reset value", then press the OK button, the state of the keystone correction is
released.
Items Operation Adjustment
Curved
correction -
X/Y Gain
Press the◄ & ►
button
Adjust the right & left of the
width
Press the▲ & ▼
button
Adjust the top & bottom of the
width
Curved
correction -
X Offset
Press the◄ / ►
button
Adjust the left / right of the
distortion
Press the▲ / ▼
button
Adjust the top / bottom of the
distortion
Curved
Correction -
Y Offset
Press the◄ / ►
button
Adjust the left / right of the
distortion
Press the▲ / ▼
button
Adjust the top / bottom of the
distortion