Eiki EK-308U, Руководство пользователя

Страница: 14 / 84

14
Install remote control batteries
Operating range
① Open the battery
cover.
② Install new batteries. ③
Put the cover
back.
Two AAA batteries
For correct polarity
(+ and –), be sure
battery terminals
are in contact
with pins in the
compartment.
Point the remote control toward the remote
control receivers on the projector (front and
back) when pressing any button.
The maximum operating range for the remote
control is about 5 meters and 60 degrees.
Part names and functions
To ensure safe operation, please observe the following precautions:
● Use two (2) AAA or LR3 type alkaline batteries.
● Always replace batteries in sets.
● Do not use a new battery with a used battery.
● Avoid contact with water or liquid matter.
● Do not expose the remote control to moisture or heat.
● Do not drop the remote control.
● If the battery has leaked in the remote control, carefully wipe the case clean and
install new batteries.
● Risk of explosion if two batteries are replaced by an incorrect type.
● Dispose of used batteries according to the instructions on the battery or local
regulations or guides.
30°
30°
5m
30°
30°
5m
The projector can be adjusted up to 10º with
the adjustable feet.
Rotate the adjustable feet to lift the projector to
a certain height. During lifting, rotate the foot
clockwise.
To lower or retract the adjustable feet, rotate
the foot counterclockwise.
Keystone distortion of projected images can
be corrected by auto settings, remote control
operation or menu operation.
Adjustable feet
Adjustable feet