Page
9
Step 14. Fully
insert wind vane arm
into
the hub at the top of the wind
sensor. Align the vane with the
centre axis of the sensor.
Using the 5/64 inch Allen key,
tighten the set/grub screw at the
top of the hub to lock the
windvane in place.
Step 15. Slide the
cross arm
adapter
onto the cross arm.
This requires the 5/32 inch (~4mm) Allen key.
Step 16. Remove the socket head post lock
screw using a 5/32” (or 4mm) Allen key.
Insert the post into the alignment hub
replace the screw, so joining the two
together.
Step 17. Sit the wind alignment hub into
the cross arm adapter, ensuring the
sensor axis is vertical.
