Eicon Networks Eicon 1550 Скачать руководство пользователя страница 100

Страница: 100 / 157

Web Interface Settings Glossary

100

VHSI Port Menu

Line Interface

Defines the type of line connected to the VHSI port. Choices:

• Leased: The port is connected to a null-modem cable or a modem that links to a

dedicated leased line.

• Dial: The port is connected to a modem that must be dialed to make a connection.

Duplex

Defines the type of device the VHSI port is connected to. Choices:

• Full: The port is connected to a full-duplex device. This is the most common case and

is usually the choice for an X.25/QLLC connection.

• Half

The port is connected to a half-duplex device. This is most often used on an

SDLC connection.

Multidrop

Defines the type of line connected to the VHSI port: point-to-point or multi-point.

Modem Interface

Defines the VHSI port interface: V.24/RS-232, V.35, V.36/RS-449/EIA-530 and X.21.
Specify ‘Autodetect’ to have the Eicon 1550/1551 detect the type of interface
automatically.

Содержание Eicon 1550






























































































































































Результаты поиска

Содержание Eicon 1550

Отзывы:

Eicon Networks Eicon 1550, Руководство пользователя, Страница: 100 / 157

Результаты поиска

Содержание Eicon 1550

Отзывы: