background image

Page 2

Second Edition (February 2002)

206-418-02

Eicon is a registered trademark of Eicon Networks Corporation. 

Microsoft, Windows, and Windows NT are either registered trademarks or trademarks of 
Microsoft Corporation in the United States and/or other countries. 

Adobe and Acrobat are either registered trademarks or trademarks of Adobe Systems 
Incorporated in the United States and/or other countries. 

Apple and Macintosh are trademarks of Apple Computer, Inc. in the United States and/or 
other countries. 

IBM is a registered trademark of IBM Corporation in the United States and/or other countries. 

All other brand and product names are trademarks or registered trademarks of their 
respective owners.

Changes are periodically made to the information herein; these changes will be incorporated 
into new editions of the publication. Eicon Networks may make improvements and/or changes 
in the products and/or programs described in this publication at any time.

If you have comments on this manual or the products it describes, address them to:

Eicon Networks Corporation
WAN Communications
Attention: Technical Publications
9800 Cavendish Blvd.
Montreal, Quebec
Canada H4M 2V9

Eicon Networks Corporation may use or distribute whatever information you supply in any way 
it believes appropriate without incurring any obligations to you.

Eicon Networks Corporation is a business unit of i-data international a-s.

Copyright © 1999-2002 Eicon Networks Corporation. All rights reserved, including those to 
reproduce this publication or parts thereof in any form without permission in writing from Eicon 
Networks Corporation.

Содержание Eicon 1550






























































































































































Отзывы: