manualshive.com logo in svg

Eibmarkt EIB/KNX, Руководство пользователя, Страница: 12 / 16

Поделиться
Скачать
Eibmarkt EIB/KNX Скачать руководство пользователя страница 12

© 1997 – 2010 EIBMARKT GmbH 

 

Page 12

 

Filter: 

The physical address is used to check whether the received physically addressed  

 

telegram should be routed to IP. 

 

Broadcast telegrams: 

Block: 

No received broadcast telegrams are routed to IP. 

 

Route: 

All received broadcast telegrams are routed to IP. 

 

Acknowledge (ACK) of group telegrams: 

Always: 

An acknowledge is generated for every received group telegram (from KNX/EIB). 

 

Only if routed: 

An acknowledge is only generated for received group telegrams (from   

 

 

  KNX/EIB) if they are routed to IP. 

 

Acknowledge (ACK) of physically addressed telegrams: 

Always: 

An acknowledge is generated for every received physically addressed telegram   

 

  (from KNX/EIB). 

 

Only if routed: 

An acknowledge is only generated for received physically addressed group  

 

 

  telegrams (from KNX/EIB) if they are routed to IP. 

 

Answer with NACK:  

Every received physically addressed telegram (from KNX/EIB) is  

 

 

 

responded to with NACK (not acknowledge). This means that  

 

 

 

communication with physically addressed telegrams on the  

 

 

 

corresponding KNX/EIB line is not possible. Group communication  

 

 

 

(group telegrams) is not affected. This setting can be used to block  

 

 

 

attempts at manipulation. 

 

Содержание EIB/KNX

















Отзывы:

Нет отзывов