EIBENSTOCK ERS 180, Оригинальное руководство пользователя

Страница: 19 / 44

19
Dust Extraction
Dust which appears during work is harmful to health. For this reason, use
an industrial vacuum cleaner while sanding.
The appropriate Wet/Dry Vacuum Cleaner DSS 25 A is available as
accessory. Directly connect it to the nozzles which are meant for it on the
dust hood.
Changing the brush rim
In case of wear of the brushes (extreme
amount of dust during sanding), the brush
rim has to be replaced.
For this purpose, pull the worn brush rim out
of the guide way and put the new one in the
flute which is meant for it.
Instruction for use
Connect the lead cable of the Rotary sander ERS 180 with the industrial
vacuum cleaner and then connect the extraction hose with dust hood of the
sander. Lead the extraction hose and the cable to the back away from the
machine. Activate the switch-on automatic on the vacuum cleaner.
Switch the machine on and put it carefully on the surface you want to work
on. Hold the machine with both hands and move it in a linear or rotary way.
! Attention!
Do not touch rotating parts!
Care and Maintenance
Before the beginning of the maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points have to be observed:
Always keep the power tool and the ventilation slots clean.
During work, please pay attention that no particles get inside the
machine.
In case of failure, a repair has to be carried out by an authorised
service workshop.