EIBENSTOCK 0332L000, Оригинальное руководство пользователя, Страница: 17 / 52

16
Additional Handle
For manual drilling, the EHD 2000 S may be used only together with its
additional handle which comes with the tools. Place it on the gearing collar
from the front and fix it by counterclockwise rotation.
Switching ON and OFF
Short-time operation
ON: Press the ON/OFF switch
OFF: Release the ON/OFF switch
Long-time operation
ON: Keeping the ON/Of switch pressed, push in the arrestor button.
OFF: Press and release the ON/OFF switch again.
!
Attention!
Use the arrestor button only during operation with drill rig. Its
use during manual operation is not allowed.
If the machine stops for any reason or due to power failure,
immediately release the arrestor button by pressing the ON/OFF
switch.
The EHD 2000 S is equipped with an electronic switch. With this
switch the speed can be regulated according to the pressure on the
button. Only use the electronic switch when you want to start or stop
the machine in order to avoid material splashing around. A
permanent use with reduced speed can cause an overload because
the motor then gets less cooling air and therefore the machine will be
overheated much faster.
Changing Gears
The EHD 2000 S is equipped with a 2-gear gearing. Select the speed
according to the drilling diameter.
Use the gear selector to change to next higher or lower gear.
If gear changing is too heavy, slightly turn the working spindle to ease gear
changing.
Switching the tool on and off for a moment may also help to ease gear
selection.
!
Warning!
▪
Never apply force, and change the gear only when the
tool is running down.
▪
Never use tools, such as hammers or pliers to change the
gear.