EIBENSTOCK 0332L000, Оригинальное руководство пользователя, Страница: 15 / 52

14
Application for Indented Purpose
The diamond core drill EHD 2000 S is indented only for professional use
and may be used only by instructed personnel.
With a Dust Extraction and an appropriate drill bit, the tool can be used for
cutting of bricks, sand-lime bricks and pore concrete (not for concrete,
stone).
Safety Instructions
Safe use of the tool is only possible if the user had
studied the instruction manual and safety instructions
completely and is strictly following the instructions
contained therein. Additionally, the general safety
instructions of the leaflet supplied with the tool must be
observed. Prior to the first use, the user should absolve a
practical training. Save all warnings and instructions for
future reference.
If the mains cable gets damaged or cut during the use, do not
touch it, but instantly pull the plug out of the socket. Never use
the tool with damaged mains cable.
Prior to drilling in walls and ceilings, check them for hidden
cables, gas and water pipes and other media.
Check the working area, e.g. using a metal detector.
Prior to the start of your work, consult a statics specialist to
determine the exact drilling position.
If drilling through ceilings, secure the place below, because
the drill core may fall downward.
The tool must neither be wet nor used in humid environment.
▪
Do not use the tool in an environment with danger of explosion.
▪
Do not use the tool standing on a ladder.
▪
Do not drill into asbestos-containing materials.
▪
Do not carry the tool at its cable, and always check the tool, cable and
plug before use. Have damages only repaired by specialists. Insert the
plug into the socket only when the tool switch is off.
▪
Modifications of the tool are prohibited.
▪
Unplug the tool and make sure that the switch is off if the tool is not
under supervision, e.g. during preparation and take-down works, at
power failures, for insertion or mounting accessories.
▪
Unplug the tool if is stops for any reason. So you avoid sudden starts in
unattended condition.
▪
Do not use the tool it its shell, switch, cable or plug are damaged.