Amphion User Guide
Page 6 of 26
Electrical
The Amphion S14 is designed to be connected to a regulated 24VDC
power source and deployed within a
Limited Energy Circuit
to
protect the Amphion device and wiring. The power should be
connected to the power terminals according to the terminal
drawing supplied in the Installation Section of this manual.
Main Power:
24VDC, 10W
Grounding
The Amphion S14 case is grounded and the electronic circuit is
isolated. Proper installation requires the use of minimum CAT-5
shielded Ethernet cable with a shielded head that is also grounded.
The user is responsible to make sure the Amphion case and shielded
cables are properly grounded, either via a grounded DIN rail or by
other means.
Figure 2: Grounding of Amphion S14 and shielded Ethernet cable
