Amphion User Guide
Page 13 of 26
Configuration
Configuration of the Amphion S14 may be accomplished by one of
two methods.
1.
Configuration using a USB drive
This method uses a configuration file created by an administrator in
the ei
3
web application and transferred to the S14 via a USB drive.
The configuration files must have the special file type “.ei3”.
2. Configuration using the Web Interface (S14-N only)
This method allows you to input the network information directly
into the Amphion device. To use this method, obtain the username
and password for the device from your ei
3
administrator. This
method will also allow editing of existing information in an S14-H
and S14-C after it has been previously configured using a USB drive.
The following information is needed to configure an S14:
•
IP address of the S14 interface on the SFLAN or company
network
•
Subnet Mask
•
Default Gateway
•
IP address of the S14 on the machine LAN.
