Appendix A
Maintenance Tool Messages
Fire Alarm
When a unit detects smoke/heat, a local fire alarm event log entry will be
generated.
Smoke Alarm
When a unit detects smoke, a local fire alarm event log entry will be
generated. (3000 series)
Heat Alarm
When a unit detects heat, a local fire alarm event log entry will be
generated. (3000 series)
Hard-Wired Alarm
When a unit sounds due to the hardwired interconnect, a hard-
wired interconnect alarm event log entry will be generated.
RF Alarm
When a remote fire condition is detected over RF, this event log entry will
be generated.
Button Test
Pressing the test button on a unit long enough to send out a button test
message will generate a direct button test event log entry.
Remote Test
When a remote button test message is heard, this event log entry will
be generated. Note that a cancel may propagate before this message reaches units after
moving through the RF network.
Sensor Fault
This event log entry will be generated if there is a problem with any units
sensor
Alarm Low Battery
If a low battery is detected on the unit, an event log entry will
be generated.
Module Low Battery
If a low battery is detected on the module, an event log entry
will be generated
End Of Life
For units that can generate an end of life fault. This event log entry will
be generated.
Head Removed
When a unit is removed from its base, this event log entry will be
generated.
Mains Absent
When mains power is removed from a mains powered unit, this event
log entry will be generated.
Interference
If a unit detects interference spanning over 30 seconds, this event log
entry will be generated.
21
