29
www.ehs-heating.com
10.6.2.
Press “
UP / DOWN”
to adjust hour,
10.6.3.
then press
“MODE” key again to get minutes to flash
10.6.4.
Press “
UP / DOWN”
adjustment for minutes.
10.6.5.
Press
“CONFIRM”
to complete the setting.
10.7.
Week Settings:
10.7.1.
In Standby/Summer mode status, press
“MODE” 5 times and
is flashing.
10.7.2.
Press “UP / DOWN” to set the day of the week.
10.7.3.
Press
“CONFIRM”
to complete the setting.
10.8.
Boiler 24 Period timing and each timing temperature set:
10.8.1.
Press
“Clock” key to enter the on / off time setting, the 24-hour time period flashes.
10.8.2.
Press
“UP / DOWN”
to make the on / off hour setting.
(Note: Press “UP” Select this segment time
on-the segment lamp is on
, Press “DOWN” Cancel the segment timing-segment light off
.
And
then press “MODE” and the
flashes. Press
“UP / DOWN”
to set the temperature. Long press
“Clock” for 3 seconds until the
icon is light and timing function starts.
10.8.3.
(1-24) Time on / off / temperature setting is completed. After the appointment time / temperature
setting, press the “TIME” for 3 seconds to enter the reservation time / temperature on / off.If there is
no need to set the timing function, press the 3-second “TIME” key to exit the reservation function.
Note: (The second grid from left to right is the first hour.
）
10.9.
Heating temperature setting:
10.9.1.
In radiator mode
, the heating water temperature can be set 30
℃
-80
℃
.
10.9.2.
In floor heating mode
, the heating water temperature can be set 30
℃
-60
℃
10.10.
Direct Hot Water temperature setting range:
Hot water temperature can be set up the temperature
range: 30
℃
-60
℃
.
11.
Electrical Circuit Diagrams and Technical Data
Circuit Diagram
