300781 • 1/2019 • H.S.
53 of 70
Operating Instruction
High Pressure Cleaner cold water, mobile
Series 3x3
6 Operation
To remove the dirt, spray on the detergent sparingly onto the cleaning
object and let it work for approx. one to five minutes.
Then spray the loosened dirt with the high pressure jet.
After using detergents, rinse the high pressure cleaner for at least 30
seconds.
6.5.4
Special application of detergent agents for
food appliance (only version Premium)
For special cleaning tasks in the food industry, the operation can be
converted to use with the SoftFoam KIT HP with 2 l bottle (2, Fig. 6-7).
The 2 l bottle is provided for additional chemistry used for food industry.
For conversion to cleaning tasks in the food industry with SoftFoam KIT HP
with 2 l bottle proceed as follows:
Remove the spray lance (3, Fig. 6-2) from the trigger gun. To do this,
retract the quick lock (2, Fig. 6-2) and remove the spray lance from the
trigger gun.
Mount the SoftFoam KIT HP with 2 l bottle on the trigger gun. Pull back
the quick lock (see Fig. 6-6) and insert the mounting kit into the spray
lance.
Make sure that the quick lock locks fully forward again after inserting
the mounting kit.
Fill the 2 l bottle with the desired chemical additive. The cleaning agent
is sucked in during operation via the injection principle and mixed
directly into the high pressure jet
Set the dosing of the quantity of cleaning agent according to the
degree of soiling of the cleaning object via the controller (1, Fig. 6-7)
on the 2 l bottle.
General Information
The more the regulator is turned to the left, the more of the amount
of cleaning agent is sucked in. Depending on the application, use this
controller to specify the dosage.
To remove the dirt, spray on the detergent sparingly onto the cleaning
object and let it work for approx. one to five minutes.
Then spray the loosened dirt with the high pressure jet.
After using detergents, rinse the high pressure cleaner for at least 30
seconds.
To return to normal operation with the double spray lance, proceed in
reverse order to the installation procedure for the SoftFoam KIT HP with
2 l bottle.