14
2 Installation instructions
Mounting the shutter catch
Determine the operating height
Mark the holes
Holes
o
perating height
Drill the marked holes with a Ø 5.1 mm drill
through the hinge profile and approx. 5 mm
into the connection profile.
Rivet the supporting block and shutter catch
with N1 RIVEtS.
Mounting the stop angle
NotE
the selection of the fastening method is de-
pendent on the substrate and is therefore ex-
clusively your own responsibility.
close the sash packet
A
Espagnolette stop angle
Espagnolette stop angle
Position the stop angle for the espagnolette
in the middle behind the closed espagno-
lette closure (see Fig. A).
A
5
5
Espagnolette closure
Stop angle
