EHEIM 2227, Руководство пользователя

Страница: 20 / 162

Take out the lattice
screen as well as the
individual media con-
tainers one at a time.
The retractable hand-
les of the media con-
tainers can be pulled
out in an upward di-
rection.
EHEIM professionel wet/dry canister filter 2227 and 2229
EHEIM professionel wet/dry thermofilter 2327 and 2329
Pump head Sealing gasket Output pipe Lattice
screen Media containers EZ clips Filter canister
Wet/dry floater compartment Sealing ring Wet/dry
floating control valve Locking pins Integrated double
tap connector Hose clamp Security outlet pipe Spray
bar and end cap Intake pipe Intake strainer Foam
prefilter Intake/outtake for breather tube Tubing
21
Suc-
tion cups with clips
22
Key for locking pins
23
Vaseline
24
Cleaning brush Thermofilter:
25
Thermostat
26
Tempera-
ture sensor
27
Velcro tape
When unpacking, please check to make sure that all parts
have been included.
Assembly
Flip out all four EZ clips and push upwards. With the help of
the two recessed lid handles, the pump head of the filter can
be easily removed.
Now fill the media containers to just below the edge, ONLY
with original SUBSTRAT
pro or EHFISUBSTRAT filter media.
After you have checked to be sure that the wet/dry connec-
tion supports are not soiled, put the first media container
back into the filter canister. When doing so, be sure that the
flow-through opening sits above the wet/dry connection
supports. Firmly press the media container downwards until
it rests on the support frames. This guarantees a secure seal
between media container and filter canister.
Attention: Do not overfill. Do not clog flow-through
pipe. In all media containers only use SUBSTRAT
pro
or EHFISUBSTRAT.
16
Attention: In order to guarantee the synchronized function-
ing of the wet/dry filter, use only the enclosed original parts.
Changes should not be made in the intake or output areas.
Then, thoroughly rinse filter media under running water un-
til all cloudiness has disappeared.
Attention: 2327 and 2329 thermofilters should only be
used for freshwater.
Push in the second (and third) media container in the same
manner, so that the pipe openings lie on top of each other.
Again lower the retractable handles for each of them and
be sure that all of the media containers lie flush on top of
each other. Place lattice screen.