EHC eco SAVE, Руководство по установке

Страница: 3 / 12

3
1. Smart Gateway
2. Power Meter & Cable Clamp
3. USB Adapter
4. USB Cable
5. Ethernet Cable
REQUIREMENTS
Gateway:
To operate the eco SAVE Smart gateway you will require a Broadband Internet Connection. The
Gateway can then be connected to a free LAN port on your router using the supplied Ethernet cable.
The Gateway comes supplied with a Micro USB Power Cable and 230 volt power adapter.
Note:
The DHCP server within the router must be activated, there must be a direct Internet connection
without passing through a proxy. Output ports, 123 UDP - 3000 TCP must be open. (Check with
Router Manufacturer)
The Power Meter must be only be installed by a qualified electrician in accordance to I.E.E.
regulations BS 7671.
Getting Started:
Remove the packaging and check that all contents
are correct.
Note: Do Not Power Up the Gateway at this stage!