EHC 214C series Скачать руководство пользователя страница 35

Страница: 35 / 44

OPERATION

Touch navigation sensor fields to change

the temperature. Temperature range and

default temperature are described in section

Menu \ Heating functions. Select the desired

temperature and touch

. sensor field to

confirm. After touching the . sensor field,

thermometer symbol stops flashing. At the

same oven level symbol start flashing and it

is possible to modify it.

If no changes are made within 3 minutes,

the appliance exits to upper menu (User

Programmes) and stores settings last shown

on the display. Only changes confirmed by

touching are updated.

Touch

navigation sensor fields to change

the oven level. Select the desired oven level

and touch sensor field to confirm.

After touching the sensor field, oven level

symbol stops flashing. At the same cook

time symbol start flashing and it is possible

to modify it. If no changes are made within 3

minutes, the appliance exits to upper menu

(User Programmes) and stores settings last

shown on the display. Only changes con-

firmed by touching are updated.

Touch

navigation sensor fields to

change the cook time. Select the desired

cook time and touch sensor field to con-

firm. After this, all selected and confirmed

parameters are stored by the appliance and

the appliance exits to upper menu (User

Programmes).

When you re-enter P01 from the user pro-

grammes menu the appliance displays the

last saved settings. Editing the settings for

other programmes (P02-P10) is done in the

same way.
Touch or sensor field to change time

and temperature settings respectively during

operation of a user program.

Содержание 214C series













































Результаты поиска

Содержание 214C series

Отзывы:

Похожие инструкции для 214C series

Бренды по названию

Популярные бренды

EHC 214C series, Инструкция по эксплуатации

Результаты поиска

Содержание 214C series

Отзывы:

Похожие инструкции для 214C series

Бренды по названию

Популярные бренды