Page | 18
3.6.2
Device configuration
This tab allows the user to set several G6N parameters beyond that included in the Working Mode tab.
Figure 24: Device Configuration
3.6.2.1
Language
This allows the user to select the preferred language. Current supported languages:
•
English
•
Chinese
•
Japanese
•
Russian
3.6.2.2
Time Zone
This sets the Time Zone for the G6N
3.6.2.3
Direct Link Mode
Direct Link Mode allows for troubleshooting features for EGS to assist. The options allow for tracker and remote debug logging options
to verify if an issue is hardware related.
The options for Direct Link Mode are:
•
Disable (default)
•
OEM
•
UHF
•
TTS
3.6.2.4
Sensor
This sets the update rate of the internal GNSS board. The supported options are:
•
Disable
•
1Hz
•
5Hz
•
10Hz
•
20Hz
3.6.2.5
Speaker
This allows the user to enable / disable the external speaker. Note the speaker must
be enabled hear the results of a ‘self
-
test.’
3.6.2.6
First Storage
This allows the user to select the location for logged data. The user may select from:
•
Internal storage
•
SD card (must be formatted and installed in the G6N to operate properly)
3.6.2.7
Tracker
This enables / disables the tracker function logging for the Direct Link Mode.
3.6.2.8
Remote Debug
This enables / disables the remote debug logging for the Direct Link Mode.
