56-VOLT LITHIUM-ION REAR-MOTOR 15" STRING TRIMMER — STX3800
24
8. Align the notches of the spool assembly from which the cutting lines protrude
with the eyelets in the spool retainer, and position the spool assembly into the
retainer with cutting line secured in the eyelets (Fig. 19).
9. Align the release tabs on the spool
retainer with the slots in the upper
cover to mount the spool retainer
onto the upper cover (Fig. 20).
Make sure that the release tabs are
against the upper-cover inside wall
and are exactly located in the slots
on both sides (Fig. 21).
WARNING:
Make sure that the
release tabs on the spool retainer snap
into place, otherwise the spool assembly
will come out during operation, which
may result in serious personal injury.
19
Eyelet
Notch
Notch
Eyelet
21
20
Slot
Release
Tab