![background image](http://html1.mh-extra.com/html/ego/power-csx3000/power-csx3000_operators-manual_2368078013.webp)
CORDLESS TOP HANDLE CHAIN SAW — CSX3000
13
EN
TROUBLESHOOTING
PROBLEM
CAUSE SOLUTION
SOLUTION
Motor does not start.
◾
The power plug of battery holster is not
attached to the chain saw.
◾
Insert the power plug of battery holster to
the chain saw.
◾
No electrical contact between the
battery holster and battery.
◾
Detach battery, check contacts and reinstall
the battery pack.
◾
The locking tongue is not folded up.
◾
Fold up the locking tongue before starting.
◾
The
“ON-OFF”
switch is positioned to
“OFF”
.
◾
Turn the
“ON-OFF”
switch to
“ON”
.
◾
Chain brake is engaged.
◾
Pull the chain kickback brake paddle
backward toward the top handle, arriving at
the operating position.
Chain saw stops running
during working.
◾
The battery pack or chain saw is too hot.
◾
Cool the battery pack or chain saw.
◾
The chain saw is overloaded.
◾
Decrease the load.
◾
Too much bits of wood blocks the
ventilation channel.
◾
Clean the dust refer to the
“REMOVE DUST”
part.
◾
The battery pack is depleted.
◾
Charge the battery pack.
Chain brake does not
engage.
◾
Debris preventing full movement of the
chain kickback brake handle.
◾
Clean debris from external chain brake
mechanism.
◾
Possible chain brake malfunction.
◾
Contact EGO Customer Service for repair.
No oil lubrication when
cutting.
◾
Chain oil tank is empty.
◾
Filling bar and chain lubricant.
◾
The oil outlet of chain bar is blocked.
◾
Clean up the dust in the oil outlet.
◾
Oil solidification in low temperature.
◾
Change the proper lubricating oil(suit for low
temperature).
Low oil-indicator flashes
in red color or showing
abnormal light while the
oil tank filled with oil.
◾
Special use angle of the machine
causing the oil in the oil tank not enter to
enter the oil pipe.
◾
Place the chain saw flat and try again.
◾
The category and color of oil is not
recommended.
◾
Use the recommended translucent yellow,
translucent red or translucent oil
◾
Low oil-indicator still flashing red.
◾
Contact EGO Customer Service for repair
Low oil-indicator does
not work while the oil
tank is short of oil.
◾
The category and color of oil cannot be
identified.
◾
Use the recommended translucent yellow,
translucent red or translucent oil.
◾
A small amount of oil still in the oil tank
or oil pipe.
◾
Use chain saw for a while and then observe
low oil-indicator again.
◾
Low oil-indicator still not work for the
above reasons.
◾
Contact EGO Customer Service for repair.
WARRANTY
EGO WARRANTY POLICY
Please visit the website
egopowerplus.com
for full terms and conditions of the EGO Warranty policy.