EGO PH1400, Руководство оператора, Страница: 14 / 72

56-VOLT LITHIUM-ION POWER HEAD—PH1400
14
INSTALLING AN ATTACHMENT TO THE POWER HEAD
WARNING:
Read and understand entire Operator’s Manual for each optional
attachment used on this power head and follow all warnings and instructions. Failure to
follow all instructions could result in electric shock, fire and/or serious personal injury.
WARNING:
This 56V power head PH1400 is designed to be used only with the
EGO attachment models that are specified in this Operator’s Manual or subsequently
introduced by EGO for use with this power head. Use of other, unauthorized
attachments could cause serious personal injuries or property damage.
WARNING:
Some accessories have specific requirements related to safety.
Always pay special attention to such instructions in the manual that accompanies each
accessory.
WARNING:
Never install, remove, or adjust any attachment while the power
head is running or with the battery installed. Failure to stop the motor and remove the
battery can cause serious personal injury. NEVER OPERATE THE POWER HEAD WITHOUT
AN ATTACHMENT.
The attachment connects to the power head by means of a coupler device.
1. Stop the motor and remove the battery pack.
2. Loosen the wing knob.
3. Remove the end cap from the attachment. Align the arrow on the attachment
shaft with the arrow on the coupler and push the attachment shaft into the
coupler until you hear a clear “click” sound, which indicates that the attachment
shaft is mounted into place (Fig.2).
2
Arrow on the Coupler
Arrow on the Attachment Shaft
Attachment Shaft
Shaft-Release Button
Power-head Shaft
Wing Knob