EGO HT2410E, Руководство оператора

Страница: 6 / 244

56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER— HT2410E
6
EN
BATTERY TOOL USE AND CARE
◾
Recharge only with the charger specified by the
manufacturer.
A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
◾
Use power tools only with specifically designated
battery packs.
Use of any other battery packs may
create a risk of injury and fire.
◾
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
◾
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contacts
accidentally occurs, flush with water.
If liquid
contact eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
◾
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging
improperly or at temperatures outside the specified
range may damage the battery and increase the risk
of fire.
SERVICE
◾
Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool
is maintained.
◾
Never service damaged battery pack.
Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
◾
Do not use a battery pack or tool that is damaged
or modified.
Damaged or modified batteries may
exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
◾
Do not expose a battery pack or tool to fire
or excessive temperature.
Exposure to fire or
temperature above 130 ℃ may cause explosion.
HEDGE TRIMMER SAFETY WARNINGS
◾
Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure
the switch is off when clearing jammed material.
A moment of inattention while operating the hedge
trimmer may result in serious personal injury.
◾
Carry the hedge trimmer by the handle with the
cutter blade stopped.
When transporting or storing
the hedge trimmer always fit the cutting device cover.
Proper handling of the hedge trimmer will reduce
possible personal injury from the cutter blades.
◾
Hold the power tool by insulated gripping surfaces
only, because the cutter blade may contact hidden
wiring.
Cutter blades contacting a “live” wire may make
exposed metal parts of the power tool “live” and could
give the operator an electric shock.
◾
Keep cable away from cutting area.
During operation
the cable may be hidden in shrubs and can be
accidentally cut by the blade.
◾
Check the hedge for foreign objects before operating,
e.g. wire fences.
◾
Only use the hedge trimmer with the guard properly
assembled. The use of the hedge trimmer without the
proper guard may result in serious personal injury!
◾
Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and
result in serious personal injury.
WARNING:
Check the hedge for foreign objects
before operating, e.g. wire fences Only use the hedge
trimmer with the guard properly assembled. The use
of the hedge trimmer without the proper guard may
result in serious personal injury!
IMPORTANT SAFETY INSTRUCTIONS
◾
Do not use the battery-operated hedge trimmer in rain.
◾
Do not charge the battery pack in rain or in wet locations.
◾
Use only with the battery packs and chargers listed
below:
BATTERY PACK CHARGER
BA1120E, BA1400, BA2240E,
BA2800, BA3360, BA4200,
BA1400T, BA2800T, BA4200T
CH2100E,
H5500E
◾
Do not grasp the exposed cutting blades or cutting
edges when picking up or holding the hedge trimmer.
◾
Do not use on a ladder, rooftop, tree, or other unstable
support. Stable footing on a solid surface enables
better control of the hedge trimmer in unexpected
situations.
◾
Never allow children to operate the hedge trimmer.
◾
Never remove or tamper with safety devices. Check
their proper operation regularly. Never do anything to
interfere with the intended function of a safety device
or to reduce the protection provided by a safety device.