EGO BC3800E, Руководство оператора

Страница: 11 / 388

56 VOLT LITHIUM-ION REAR MOTOR BIKE-HANDLE BRUSH CUTTER — BC3800E
11
EN
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used; In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
PACKING LIST
PART NAME
QUANTITY
Brush Cutter
1
3-teeth blade with Sheath
1
Guard Assembly
1
Nut
1
Outer Flange
1
Hex Wrench
1
Multi-Function Wrench
1
Double-shoulder Strap
1
Operator’s Manual
1
DESCRIPTION
KNOW YOUR BRUSH CUTTER (Fig. A)
1. Speed Limiting Lever
2. Lock-off Lever
3. Wing Bolt
4. Trigger
5. Bike Handle
6. Shaft
7. Cutting Line
8. Guard Assembly
9. Trimmer Head
10. Sealing Screw
11. Shaft-locking Hole
12. Guard Accessory
13. Multi-Function Wrench
14. Hex Wrench
15. 3-teeth Blade
16. Outer Flange
17. Nut
18. Release Button
19. Rubber Pad Protection
20. Latch
21. Electric Contactsms
22. Ejection Mechanism
23. Strap Buckle
24. Hip-pad
WARNING:
Never operate the tool without the
guard firmly in place. The guard must always be on
the tool to protect the user.
WARNING:
When the tool is equipped with a trimmer
head, the guard accessory with line–cutting blade should
be mounted onto the guard. Failure to comply will result in
overly long cutting line and overload the motor. Never use
the trimmer head without guard accessory.
ASSEMBLY
WARNING:
If any parts are damaged or missing, do
not operate the brush cutter until the parts are replaced.
Use of the brush cutter with damaged or missing parts
could result in serious personal injury.
WARNING:
Do not attempt to modify the brush
cutter or create accessories not recommended for use
with this product. Any such alteration or modification is
misuse and could result in a hazardous condition leading
to possibly serious personal injury.
WARNING:
Always wear heavy gloves when
installing or removing the guard and doing any
maintenance on the 3-teeth blade/line-cutting blade. Be
careful of the line-cutting blade on the guard accessory /
3-teeth blade for protecting your hands from being injured
by both the blades.
WARNING:
To prevent accidental starting that could
cause serious personal injury, always remove the battery
pack from the tool when assembling parts or transporting
the machine.
WARNING:
Never operate the tool without the guard
and bike handle firmly in place. Failure to comply could
result in possible serious personal injury.
MOUNTING AND ADJUSTING THE BIKE HANDLE
The brush cutter is stored as shown in Fig. B. Firstly,
loosen the wing bolt on the connecting joint and then lift
the bike handle 180° around the shaft (Fig. C), turn it 90°
anticlockwise to make it face the bump head (Fig. D).
Lastly, move it back and forth to achieve a comfortable
working position and tighten the bolt.