56 VOLT LITHIUM-ION CORDLESS GRASS TRIMMER — ST1620E-T
15
tabs. Press the lower cover assembly until it snaps
into place, at which time you will hear a distinct click
sound (Fig. W).
3. Follow
“LINE REPLACEMENT”
section in this manual
to reload the cutting line.
4. Start the tool to see whether the grass trimmer
will work normally. If it does not, reassemble as
described above.
MAINTENANCE
WARNING:
When servicing, use only identical
replacement parts. Inspect and maintain the machine
regularly. To ensure safety and reliability, all repairs
should be performed by a qualified service technician.
WARNING:
Battery tools do not have to be
plugged into an electrical outlet; therefore, they are
always in operating condition. To prevent serious
personal injury, take extra precautions and care when
performing maintenance, service or for changing the
cutting attachment or other attachments.
WARNING:
To prevent serious personal injury,
remove the battery pack from the tool before
servicing, cleaning, changing add-on attachments or
removing material from the unit.
CLEANING THE UNIT
◾
Clean the unit using a damp cloth with a mild
detergent.
◾
Do not use any strong detergents on the plastic
housing or the handle. They can be damaged by
certain aromatic oils, such as pine and lemon, and by
solvents such as kerosene. Moisture can also cause
a shock hazard. Wipe off any moisture with a soft dry
cloth.
◾
Use a small brush or the air discharge of a small
vacuum cleaner brush to clean the air vents on the
rear housing.
SHARPENING THE LINE-CUTTING BLADE
WARNING:
Always protect your hands by wearing
heavy gloves when performing any maintenance on
the line-cutting blade.
1. Remove the line-cutting blade from the guard.
2. Wear proper eye protection and gloves and be careful
not to cut yourself.
3. Secure the blade in a vise.
4. Carefully file the cutting edges of the blade with a
fine-tooth file or sharpening stone, maintaining the
original cutting edge angle.
5. Replace the blade on the guard and secure it in place
with the two screws.
STORING THE UNIT
◾
Remove the battery pack from the tool.
◾
Clean the tool thoroughly before storing it.
◾
Store the unit in a dry, well-ventilated area, locked-up
or up high, out of the reach of children. Do not store
the unit on or adjacent to fertilizers, gasoline, or other
chemicals.
Protecting the environment
Do not dispose of electrical
appliances as unsorted municipal
waste, use separate collection
facilities.
Contact your local government for
information regarding the collection
systems available.
If electrical appliances are disposed
of in landfills or dumps, hazardous
substances can leak into the
groundwater and get into the food
chain, damaging your health and
well-being.
