Ego Power+ LM2020E, Руководство оператора, Страница: 16 / 296

56 VOLT LITHIUM-ION CORDLESS MOWER — LM2020E / LM2020E-SP
16
EN
TROUBLESHOOTING
WARNING:
Always remove the safety key and battery pack when servicing or transporting the mower. Always
protect your hands by wearing heavy gloves or wrapping the cutting edges with rags or other materials when
performing any maintenance on the mower blade.
PROBLEM
CAUSE SOLUTION
The mower fails
to start
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
The battery pack is not mounted in place in
the battery compartment.
◾
Attach the battery pack to the
mower; press it until you hear a
click
◾
The battery or mower circuitry is too hot.
(The power indicator on the mower will
illuminate in orange for 10 seconds)
◾
Allow the battery pack or mower
to cool until the temperature drops
below 67°C.
◾
The side rails are not extended to their
maximum length and the clamps are not
locked in position.
◾
Fully extend the handle and lock
both clamps.
◾
The handle is not set at one of the three
operating positions.
◾
Adjust the handle to one of the three
operating positions.
◾
The mower deck is clogged with grass and
debris.
◾
Clean the mower deck and make
certain that the blade has freedom
of movement.
The mower cuts
unevenly
◾
The blade is dull.
◾
Sharpen or replace the blade.
◾
The cutting height is not set properly.
◾
Raise the deck to a higher cutting
height setting.
◾
The blade is assembled incorrectly.
◾
Reassemble the blade, following the
section “INSTALLING THE BLADE” in
this manual.
The mower stops
while mowing
◾
The battery pack is depleted.
◾
Charge the battery pack.
◾
Mower is in overload condition.
◾
Raise the cutting height or slow down
the mowing.
◾
Mower deck is clogged with grass and
debris.
◾
Unclog the mower deck. Raise
the cutting height, or cut a narrow
swath.
◾
The battery or mower circuitry is too hot. (The
power indicator on the mower will illuminate
orange for 10 seconds.)
◾
Allow the battery pack or mower
to cool until the temperature drops
below 67°C.
◾
The side rail is retracted a little by the
pushing force applying on the handle.
◾
Unlock the clamps. Fully extend the
side rails and lock the clamps again.