TECHNICAL DATA NOTES
RECOMMENDED ACCESSORY
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
DO NOT EXPOSE TO
RAIN OR MOISTURE!
38
T e c h n i c a l d a t a
Auto-amplified zones with Hi-Fi mono audio quality 50 W x 2 with THD of less than 1%.
USB player and micro SD card for MP3 or WAV file extensions.
Microphone preamp with built-in compressor, max 20 dB.
Electret unidirectional cardioid pickup microphone.
MILLENNIUM output through the following signals:
4
Ground output.
5
Channel 1 music output (7 V and 3 V~).
1
Message channel output (7 V and 3 V~).
05011
- 100V, low impedance 4
W
50 W symmetrical transformer for DIN rail or wall.
TECHNICAL DATA
Supply voltage
Maximum consumption (active)
Maximum consumption (stand-by)
Frequency response (@ 3dB)
Zone 1 output
Zone 2 output
Zone 3 MILLENNIUM output
Antenna output
AUX audio input
MP3 music input
DIN-DON and messages input
Working temperature
Weight
(Kg.)
Dimensions (mm)
110 V~ / 230 V~; 50/60 Hz (by selector)
2 A (110 V~); 1 A (230 V~)
< 0.002 A (110 V~); 0.001 A (230 V~)
20 Hz ÷ 20 KHz
50 WRMS; 4
W
min.
50 WRMS; 4
W
min.
7 V and 3 V~
RF coaxial connector
3.5 mm. ST jack (500 mV)
USB (150 mA max.)
Micro SD memory card
5ºC to / 50ºC
0.85
220 x 190 x 295
(with flexible gooseneck ex cabling protection cover)
The exclamation mark within a triangle is intended to alert the user of the presence of important operating and
maintenance instructions in the literature accompanying the product and of the existence of internal components
whose replacement may affect safety.
Class I Apparatus.
The lightening flash with arrowhead sign is intended to alert the user of the presence of non-insulated dangerous
voltage. To reduce the risk of an electric shock, do not remove the cover.
This symbol is intended to alert the user to the fact that that the product cannot be disposed of as normal
household waste. It must be taken to a special collection point for electric and electronic equipment.
WARNING:
To reduce the risk of an electric shock, do not remove the cover.
There are no user-adjustable parts inside the product.
Repairs must only be carried out by qualified personnel.
Do not expose this article to rain or moisture.
WARNING:
To avoid spread of fire, do not use candles or other types of flames near to the product.
1. Read these instructions.
Before using your new unit please read all of the safety and operating instructions.
2
Keep these instructions.
Keep these instructions for future reference and troubleshooting.
3. Heed all warnings.
All of the warnings in this manual must be heeded.
4. Follow all instructions.
By following the instructions in this guide you will be able to use the system correctly and safely.
5
Water and moisture.
Do not use this appliance near to water (swimming pools, fountains, etc.). Make sure that the equipment
is not exposed to splashing and do not place glasses or bottles containing liquid on it.
6. Cleaning.
Clean with a dry, lint-free cloth. Do not use abrasive solvent-based cleaning products.
7. Installation.
Do not install the apparatus near to a heat source such as radiators, heaters or other appliances that produce
heat. It must always be installed in a place that allows air to freely flow through its ventilation grille.
8. Earthing connection and power supply cords.
The power supply cable that is supplied with your unit has a three-
terminal connector. Do not cut or damage the earth terminal. If the connector supplied does not fit your plug, as an
electrician to replace the obsolete plug. Protect the power supply cord from being walked on or pinched.
The unit has a disconnectable power supply cord that connects to the AC connector on the frame. The power supply cord
has an IEC female connector at one end and a male connector at the other.
The unit does not have a switch; the switch is the power supply cord itself. The plug socket must be accessible and near
to the unit.
Bear in mind that the nominal supply voltage is that indicated on the label, with a range of ±10% of said value (according
to IEC 60065:2001).
9. Options.
Only those accessories supplied by the manufacturer should be used.
10. Servicing.
There are no user-adjustable parts inside this unit. Any maintenance or repair work must be performed by
qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as liquid has been
spilled or objects have fallen into the apparatus, it has been exposed to rain or moisture or it does not operate properly
or it has been dropped.
SAFETY PRECAUTIONS
