7
1
2
3
4
2.1 Assembly / Disassembly
Check that the blades are sharp, intact and free
from cracks before attaching the mower. This avoids
unnecessary breakdown while mowing.
Assembly
1. The locking handle on the A-frame of the base machine
must be in the unlocked position. (Picture 1)
2. Drive the base machine right up to the A-frame of the
mower, so the A-frames fit into each other. (Picture 2)
N.B. It is recommended that the A-frame of the machine
is not dropped completely down, as this may damage the
mower paintwork when the A-frames are fitted together.
3. Raise the A-frame by pulling the joystick back until the
support wheels hang free of the ground. (Picture 3)
4. Switch off the engine.
5. Use the locking handle on the A-frame to lock the
mower in place. (Picture 4). The locking handle can only be
engaged when the engine has been switched off.
Removal
Follow the procedure for fitting in reverse order.
Locking handle
Attaching
Lift
U
nloc
ked
Locking
Operator’s manual
Operator’s Manual City Ranger 2250 Mulch mower/rotary mower 1600