Egholm 2001, Руководство оператора

Страница: 9 / 20

G) Make sure that the locking handle is left in locked
position - the Salt and Sand Spreader is locked in
place. (Picture 1). Pull the Salt and Sand Spreader
to test a correct fit - it must not move.
H) Connect the hydraulic hoses:
If mounted, disconnect the snap couplings of the
rear lifter.
Connect the snap couplings of the Salt and Sand
Spreader to the connectors C1 and C2. (Picture 2)
For Salt and Sand Spreaders with a magnetic
valve, connect the 12V plug to the output on the
right side of the basic unit. (Picture 3)
D Diis sa as ss se em mb bllyy
Reverse the above procedure.
C Ca au uttiio on n!!
Make sure that all hydraulic hoses (and
the electrical plug) are disconnected and
that they are not caught in something
when driving away from the Salt and
Sand Spreader.
2.3 Start-up
Start the basic unit. Then place lever C in the bracket.
(Picture 4)
If the Salt and Sand Spreader is equipped with a
magnetic valve (for switching the spreader on and off
electrically), activate the switch for the power outlet.
(Picture 5)
The Salt and Sand Spreader is now activated.
N NB B!!
Before start-up, make sure the rear
guard is positioned correctly.
Switch for power outlet
The Salt and Sand Spreader is in place
C2 C1
9
2. INSTRUCTIONS FOR USE
4
3
2
1
5
Power outlet