egepack e one 45571 60503, Руководство пользователя

Страница: 11 / 17

20 21
6. USE
1 The dispenser must be mounted to the wall
using the supplied mounting kit.
2 Use the supplied key to unlock and
open the lid
3 Open the batteries-housing (A) and
insert 4 D batteries
4 place the roll with bar on the supports
5 Unroll a portion of paper and Place the paper
between the two rolls and close the
dispenser. The paper will come out auto-
matically closing the dispenser. If the
dispenser doesn’t works, open it and check
the correct positioning of paper or the
correct positioning of the batteries.
ATTENTION!!! for a correct use, check that
the rolls is fitted in the same direction as
shown on the label placed on the dispenser‘s
base.
(B)
*
!
(A)
+ +
+ +
S M LS M LS M L
TIME DELAY
SENSOR PAPER
(A)
S M L S M L S M L
Time Delay Sensor Paper
*
8 Set the dispensing settings using the
apposite panel inside the dispenser :
BEDIENFELD
S M L S M L S M L
ZEITVERZÖGERUNG SENSOR PAPIER
9 Set the stop interval by moving the small
lever in correspondence with:
S = 0 Sek.
M = 2 Sek.
L = 4 Sek.
10 Set the sensitivity level of the sensor:
S kurz
M mittel
L lang
11 Set the length of the dispensed paper
portion by moving the small lever
as following:
S = 200 mm
M = 270 mm
L = 340 mm
12 The paper will come out automatically
closing the dispenser.