13
OPERATING INSTRUCTION FOR UNDERWATER TOOLS
PRIOR TO UNDERWATER WORK
· Check the machine is not leaking
· Check the functioning of all parts
· Spraying of all moving parts with spray OKS 8601 (or similar)
· Insert the consumable with grease.
AFTER UNDERWATER WORK
· Clean the machine thoroughly
· Dry the machine by blowing it with compressed air
· Spraying of all moving parts with spray OKS 8601 (or similar)
For additional information look at the specific operation and maintenance instruction.
For a long life we recommend regular (3-monthly) general overhaul by the manufacturer.
Spray OKS 8601
DANGER ZONES
Operational
condition
--------------
Life phase
Normal function
Malfunction
Improper use
Expected use
Transport
Transport of the
machine in an
inoperable
condition
Dropping the
machine
Transport the
machine in an
operable
condition
Unknown
Start-up
Use with
designated
grinding and
milling tools
Unknown
Use of tools,
which are not
rated for use at
20,000 rpm (free
speed)
Unknown
Operación
La máquina solo
trabaja con una
válvula de actuación
La máquina
trabaja sin válvula
de actuación
Valve is blocked
in actuated
condition
Unknown
Machine moves
the tool
Consumable not
properly fixed
Unknown
Unknown
Maintenance
Regular
cleaning
Breakdown of the
machine
Unknown
Unknown
MAINTENANCE INSTRUCTIONS
Our pneumatic motors are designed for an operation pressure of 4 -6 bar (65-90 PSI).
Service life and performance of the machines are decisively determined by:
a) The air purity
Blow the air hose clear before connecting it to the machine. Install dirt and water separator upstream of the
machine, if it is not possible to prevent the formation of rust and water condensation in the air distribution lines.
