How to Operate the Display Unit
Pressing “Power/M” button turns ON the electrical system to your bike.
Pressing and releasing “Power/M” button once the system is ON toggle between Odo =
Odometer, Trip = Tripmeter, Max = Max speed, AVG = Average Speed and Time = Total time
since last reset
Pressing and holding “Power/M” button for 3 seconds will turn OFF the system
Pressing “+” or “-” adjusts the PAS mode to the desired levels as indicated to the right of the
display.
Pressing and holding “+” button for 3 seconds cycles light ON/OFF the LED Head and Tail
lamp.
Pressing and holding “-” button will engage the walk assist. The motor will keep turning as long
as the button is held down.
Pressing and holding “-” button while on Max Speed, AVG or Trip will zero out the meter.
5
