NOTE: Have a bicycle service shop make any repairs or adjustments for which you do not have the
correct tools to or if you do not sufficiently understand the instructions set forth in this electric bicycle’s
manual supplement or the bicycle owner’s manual.
Inspection of the Bearings Maintenance
1.
Frequently check the bearings of the bicycle. Have a bicycle service shop lubricate the bearing
once a year or any time they do not pass the tests as noted in the Bicycle owner’s manual.
Serial Numbers to your EG Electric Bike
1.
There are 3 serial numbers that are of importance on your EG Electric Bike. They are the
Frame serial number, the Motor serial number and the Battery pack serial number. All the serial
numbers except for the battery's can be found on the outside of the box the bicycle was
shipped in.
2.
The Bike Frame Serial number to your EG Electric Bike is located on the underside of the bike
below the bottom bracket on the frame.
3.
The Motor serial number is located on the side of the motor.
4.
The Battery serial number is located neat the output posts of the Battery pack.
How to detach the rear wheel of the Electric bike
1.
! WARNING: We do not condone modifying the EG Electric Bicycle in any way shape or form.
Modifying the bike in any way, will void your Warranty. The instructions below are written only
for the maintenance or repair of the bike.
2.
To detach the rear wheel, first unhook the connector near the rear wheel on the right hand side
of the bike.
3.
Remove the plastic covers over the screws on the rear axle.
4.
Unscrew the nuts on both sides of the rear axle and the wheel should come right off.
5.
Unhook the chains from the rear freewheel (gears)
6.
To install it back on, please note and reverse all the detachment instructions.
8
