INSTALLATION INSTRUCTIONS
How to install the bicycle out of the box
1.
Unpack the bicycle from the box and cut all the ties that held the bicycle together during
shipping.
2.
Install the handle bar by inserting the handlebar stem into the head tube. An Allen key is
supplied to install the handle bar stem.
3.
Adjust the handlebar by loosening the nut holding the handlebar and then re-tightening it with
the included Allen wrench.
4.
! WARNING: Do NOT over tighten nut against the fork; for you will risk damaging your
suspension fork.
5.
The front and rear LED/reflector run on the main Li-on battery, and is operated via the light
button on the handlebar display unit.
6.
Install the pedals to the bike. Each of the pedals has a letter indicating which side it needs to
be installed to. R=Right and L=Left. Install them using the provided wrench.
7.
! WARNING: Before riding the bicycle ensure the main Li-on battery is properly installed and
locked in before riding the bicycle. If the Battery is not firmly locked onto the rear rack, it may
slide off the rack and cause damage to the battery.
8.
Insert the battery into the rear rack and lock in your battery with provided key. Ensure that the
rails are properly aligned below the battery. Ensure that the battery is locked in by lightly
tugging on the battery to ensure it will not slide out.
2
