EFX ILED-7TC, Руководство пользователя

Страница: 3 / 18

2B
1. Safety Instructions
WARNING
y
Please keep this User Manual for future consultation. If you sell the fixture to another user, be
sure that they also receive this instruction booklet.
y
Unpack and check carefully there is no transportation damage before using the fixture.
y
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the fixture.
y
It’s important to ground the yellow/green conductor to earth in order to avoid electric shock.
y
Disconnect main power before servicing and maintenance.
y
Use safety chain when fixes this fixture. Don’t handle the fixture by taking its head only, but
always by taking its base.
y
Maximum ambient temperature is Ta : 40
℃
. Don’t operate it where the temperature is higher
than this.
y
In the event of serious operating problem, stop using the fixture immediately. Never try to
repair the fixture by yourself. Repairs carried out by unskilled people can lead to damage or
malfunction. Please contact the nearest authorized technical assistance center. Always use the
same type spare parts.
y
Do not connect the device to any dimmer pack.
y
Do not touch any wire during operation and there might be a hazard of electric shock.
y
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or
moisture.
y
The housing must be replaced if they are visibly damaged.
y
Do not look directly at the LED light beam while the fixture is on.
Warning:
Please read the instructions carefully which includes important
information about the installation, operation and maintenance.
If using a 230Vac 50Hz power supply, do not connect in series more than 20 units, use
another mains supply for the next 20 units.
If using a 120Vac 60Hz power supply, do not connect in series more than 10 units, use
another mains supply for next 10 units.