6
6-9
Editing simulations
Managing simulations
With Fiery Print Calibrator, you can back up and delete simulations. You can also
remove the default simulation without deleting it. In general, removing the default
simulation is not necessary because any new simulation replaces the existing one.
T
O
BACK
UP
SIMULATIONS
:
•
Choose Backup Simulations from the Server menu to copy the simulations from the
RIP Station to your computer.
Simulations are saved in a folder called
Backup
in the folder where Fiery Print
Calibrator is located. You can save simulations for safekeeping. You should always save
simulations before updating RIP Station system software to ensure that no custom
simulations are lost.
T
O
DELETE
SIMULATIONS
FROM
THE
RIP S
TATION
HARD
DISK
:
1.
Choose Delete Simulation from the Server menu.
2.
Select the simulation and click OK.
You can remove simulations to free up disk space (although these files are small) and to
make sure no one uses the wrong simulation file. You should always use the Backup
Simulations command to save simulations before you delete them.
