5
5-2
Managing Print Jobs
Fiery Spooler jobs can be in one of the following queues:
Jobs in the queues are stored on the RIP Station hard disk. Make sure you leave
enough space on the hard disk for fonts and other Fiery Spooler jobs.
You can use the Fiery Spooler Job Log to view information about jobs printed to the
RIP Station for job accounting purposes or saved for reference. The Job Log can be
printed to the RIP Station or saved as a file and viewed in other applications.
T
O
USE
THE
F
IERY
S
POOLER
:
1.
Start the Fiery Spooler.
2.
Select the RIP Station in the Chooser window that appears.
Normal print jobs sent to the RIP Station appear in the Print
queue. You can move and manipulate these jobs as described below.
Hold
Jobs sent to the Hold queue remain in the Hold queue until they
are moved to the Print queue or deleted. If you need to print the
same document frequently, you can send it to the Hold queue and
move a copy of the job to the Print queue every time you need to
print it. You can also print large jobs to the Hold queue and then
move them to the Print queue when other users are not printing.
Printed
The jobs most recently sent to the RIP Station are saved in the
Printed queue. You can drag these jobs back to the Print queue to
print additional copies. The number of jobs saved in the Printed
queue is set by your system administrator in the Setup.
