2
• Backing up and restoring a complete system configuration (see
)
• Backing up and restoring a single environment (see
)
Make sure that you have correctly set up and licensed Fiery XF before performing the steps in
this document. See the instructions provided in
EFI Fiery proServer Installation Guide.
Connecting the network and printer to the Fiery proServer
The Fiery proServer has two network connectors on the back panel. The upper network
connector is used to connect the Fiery proServer to your network. The lower network
connector is used to connect the Fiery proServer to the printer.
T
O
CONNECT
THE
NETWORK
AND
PRINTER
TO
THE
F
IERY
PRO
S
ERVER
1 Insert the network cable into the upper Ethernet connector on the back panel of the
Fiery proServer.
2 Insert the printer cable into the lower Ethernet connector on the back panel of the
Fiery proServer.
F
IGURE
1:
Fiery proServer back panel
Fiery proServer back panel
1
Ethernet connector for
network cable
2
Ethernet connector for
printer cable
3
DVI connector for graphics
adapter
1
2
3
