EFI Fiery EX700i, Конфигурация и настройка

Страница: 10 / 65

C
ONNECTING TO THE
N
ETWORK
10
C
ONNECTING TO THE
N
ETWORK
This chapter summarizes the stages in setting up the EX700i.
EX700i on the network
When the EX700i is connected to a network, it behaves as a networked printer. The
EX700i supports the following network protocols (rules that enable computers on a
network to communicate with each other):
• AppleTalk, Bonjour
• TCP/IP, which also includes the DHCP, FTP, HTTP, IMAP, IPP, IPv4,
IPv6, LDAP, LPD, NBT, POP3, Port 9100, SMB, SMTP, SNMP, SNTP,
and SSL/TLS protocols
These protocols can run concurrently on the same cable. Computers that use other protocols
can print through a server that uses one of the supported protocols. The EX700i is
autosensing, and handles all connections simultaneously.