25
Installation and Service Guide
Installing Hardware
Configuring a static IP address for the E-35A
If the customer requires the E-35A to be configured with a static IP address (for example, in a non-DHCP network
environment), obtain a valid static IP address from the network administrator and configure the E-35A as described in
the following procedure.
To configure a static IP address for the E-35A
1
Press
Home
button on the printer operational panel.
2
From the
Home
screen of the printer control panel, select Fiery. If the
Fiery
icon does not display, press the button
on the upper right corner of the screen to switch to the icon view.
3
Press the
Fiery
tab.
4
Press
Setup
.
5
On the
Login
screen, press
Password
. Enter
Fiery.1
. Press
OK
.
Type
Fiery.1
exactly as shown. The password is case-sensitive; for example,
fiery.1
will not work.
6
On the
Setup
screen, do the following:
•
Press
WINS
. If enabled (yellow), press
Use WINS
to disable this feature. Press
Save
.
•
Press
DNS
. If enabled (yellow), press
Get DNS
address automatically to disable this feature. Press
Save
.
•
Press
IP Address
. Enter an IP address. Press
Save
.
•
Press
IPv4 Address
. Press
Manual Configuration
.
7
On the
Manual Configuration
screen, do the following:
•
In the
IP Address
field, enter an IPv4 address. Press
OK
.
•
In the
Subnet Mask
field, enter a subnet mask IP address. Press
OK
.
•
In the
Default gateway
field, enter a default gateway IP address. Press
OK
.
•
When done, press
Save
. Press
Go Back
.
8
On the
Setup
screen, press
Exit Setup
.
9
Press
Reboot Now
.
To configure a static IP address for the E-35A using the Fiery QuickTouch
1
On the Fiery QuickTouch display screen, press the
Quick launch
icon on the bottom-left corner.
2
Select
Settings
, and log in to the server as
admin
user (the default password is
Fiery.1
).
3
Select
Configure IP Address
, and select IP
Address
,
DNS
,
Subnet Mask
,
WINS
, and
Default Gateway
, as necessary.
4
Save the settings and exit.
