Effigis CPAT FLEX, Руководство по эксплуатации, Страница: 13 / 32

13
effigis.com
CPAT FLEX
Operation Manual (ITX2)
3.1.2 Installing the Vehicle Support Bracket
The vehicle support bracket is designed to store the ITX2 for handy access. It typically
mounts on the vehicle’s dash near the 12V power source so the ITX2 can remain in the
support bracket while charging. You will require 3 screws (not provided) to secure the bracket
to the dash.
CAUTION!
Do not disconnect or modify the vehicle’s safety systems such as airbags or
seatbelts. Safety system wires have yellow sleeves and yellow connectors.
Accidental triggering of these systems may cause severe injuries.
To install the support bracket:
1. Choose a location on the dash that does not interfere with any of the vehicle’s
safety features or other wiring. See the “3.1.1 Safety Precautions for Installation”
on page 12.
2. For easier installation, remove the back plate from the ITX2 clip by loosening the
large adjustment screw (see Figure 2).
Figure 2: Vehicle support bracket
Screw to secure clip to back plate
Bracket’s back plate
Openings for screws
ITX2 clip
See the installation diagram on page 28.