Effigis CPAT FLEX IRXD, Руководство по эксплуатации

Страница: 12 / 24

12 CPAT FLEX
Operation Manual (IRXD)
Power OFF:
• When flashing YELLOW, the system is in shutdown process while it is transferring
its files to the CPAT servers. If IRXD doesn’t have access to the Internet, the
maximum waiting time is 30 seconds before it is shutdown.
The LCD let the user know information about the unit. There are different kinds of displayed
information.
Page Lines Details
P1~P8 Line 1 Px Port IP Address
Line 2 ACT: # active NDR / Total
RX: # of received ingress frames
CCAP Line 1 CFG: Source from INI or CCAP
NDR: # of NDR overall
Line 2 CCAP Port IP Address
Internet Line 1 RIM status: ok or not
FTP: RX|TX
RX if receiving ok, else “--”
TX if transmitting ok, else “--”
Line 2 INTERNET Port IP Address
Versions Line 1 Client ID
Line 2 Versions CPU/FPGA
Error Line 1 Error Description
Line 2
Ingress Line 1 Ingress level
Line 2 ITX source and # of repetitions
6.3 Communication
The IRXD uses an RJ-45 Ethernet (10/100/1000 Mbits/sec) Category 5e (Cat5e) cables to
connect to the network.
6.4 Shutdown
To power off the unit there are two modes Normal and Force shutdown, usually the user
should privilege the normal shutdown mode to avoid undesired flash memory corruption,
force shutdown should be use ONLY in case that the device is not responding.