Efficient Networks
®
Router family
Command Line Interface Guide
Chapter 4: System Commands
Efficient Networks
®
Page 4-3
system backup successrate
Changes the minimum success rate required for a
group of pinged addresses.
system blocknetbiosdefault
Sets the default value used when a remote router
entry is defined.
system community
Enables changing the SNMP community name
from its default value.
system default modem
Lists the default modem settings.
system delbootpserver
Removes an address from the BootP server list.
system delhostmapping
Undoes an IP address/host translation (remap-
ping) range
system delhttpfilter
Deletes an http address filter.
system deliproutingtable
Deletes a range of addresses that reference a vir-
tual routing table or deletes the entire virtual rout-
ing table.
system delserver
Deletes an server entry.
system delsnmpfilter
Deletes the SNMP client range.
system delsyslogfilter
Renames a file in the file system.
system delsyslogserver
Deletes the Syslog address filter.
system deltelnetfilter
Deletes the Telnet client range.
system deludprelay
Deletes the UDP port range.
system history
Displays the router’s most recent console log.
system httpport
Manages the system HTTP port access.
system list
Lists the system settings for the target router.
system log
Allows logging of the device’s activity in a Telnet
session.
system modem
Changes the selected modem setting.
system moveiproutingtable
Moves a range of IP addresses to another virtual
routing table.
system msg
Sets or changes the message saved in the local
router you are configuring.
Table 4-1: System Command Listing (Cont.)
Command
Function
