9
Fig. 8. Standby mode
Instruction
VERTICAL FABRIC STEAMER
TurboVapor 1950X
Step 3
Notice for use
1. Power on:
The power light will flash and heard a sound of “bee” when plug in the product.
The screen will not light; meanwhile the machine is on standby mode.
2. Standby mode:
Press the “
” on the screen, heard a sound of “bee”, the power light, mode
light and gear light turn on. When the water tank is out of water, the “
”
flashes, and the machine is on standby mode, will not heat up. The buzzersounds
every 5s, in total 10 times.
— Default mode: ironing mode, with gear 9.
— Press “MODE”, to choose “
” , “
” and “
” circularly and
the corresponding light turn on; When under “IRONING” mode, the gear can be
selected from 1 to 9 to fit different use. When under “HEATING” mode, the gear
cannot be selected, only with sounds “bee”.
— After 3min shortage of water, the machine will auto-off and returns to the power
on mode.
3. Working mode.
A. When the machine turn on to the ‘IRONING’ mode and water tank has water
inside, the “
” mark will keep lighting, the machine will automatically
the biggest power by default to heat up. When the “
” lighting, only
the number of 9 can be lighted, when the ‘Auto’ lighting, the mark of heat up
“
oooooooooo
” will on the loop.
B. Press key “
” can change the power selection, and the mark of power
selection will lighting, the mark of heat up “
oooooooooo
” will on the loop in
quickly.
C. Chose the ‘HUMIDIFY’mode “
” ,the mark of “
oooooooooo
” will on the
loop in slowly, the machine will Humidifying with 300 watts.
D. chose the ‘cleaning’ mode “
” the mark of “
oooooooooo
” will on the
loop in slowly, the machine will working with the 1750W;
— in this mode, it’s should be have some water in water tank, and according to the
1:1 rate to mix the white vinegar or the decontamination agent.
