4
bottom drain
Fig. 1
50%
water
50%
vinegar
1
Instruction
VERTICAL FABRIC STEAMER
TurboVapor 1950X
USING GUIDANCE
– Make sure the reservoir is full of water on the relative position.
– Controlling the angle of ironing steam by the handle which is the connection of
end of sprinkler and hose.
– The sprinkler is in the head of the handle, when placed, please put on the hook
and keep it upward to avoid hot steam condenses into water droplets. The hook
can hang the sprinkler as well as clothes to be ironed.
– The steam hose is connected with the main body closely, do not pull it vigorously,
otherwise it may cause damage and leakage of steam.
– The steam generator is in inner of the machine.
– Please raise up the sprinkler timely to stretch the hose if you hear grunt or you
see the steam is interrupted.
METHOD OF REMOVING SCALE
Because of the high mineral content of water in many areas, the common problem
of garment steamer is sediment accumulation, which remains in hose and causes
steaming out irregular or even without steaming. So it’s needed to be removed
periodically (better 15 days), the following is the method:
1. Mix the vinegar with water according to the ratio of 1:1 (Fig. 1-1).
2. Inject the mixture into the machine from hose connection kit (Fig. 1-2).
3. Inject the mixture until reaches the highest water level (Fig. 1-3).
4. Press “DESCALING”, the machine will remove scale automatically.
5. Wait for 30min.
6. Discharge the mixture through the bottom drain (Fig. 1-4).