USV MT3200
Instruction manual
MT Series
Page 26 of 36
o
Leave all consumer loads switched on so that the load characteristic
remains unchanged.
o
Ensure that the UPS is in on-line operating mode.
Press the “TEST” button (and keep it pressed down for approx. 1 second).
The UPS then switches to test mode for approximately 10 seconds.
This operating mode is only used to test the function of the UPS.
In this mode the battery capacity indicator only provides a rough indication of
the battery pack charge status. This does not necessarily reflect the total
capacity of the battery pack or the overall support time it can provide.
9.2.4 Communication
Software packages are required to facilitate the exchange of data between the
UPS and a parent system. The range of features can be found in the
“Software” chapter.
