UPS
MH6000
Manual
MH Series
Page 9 of 51
3.2 Transport and storage
The UPS has to be transported in its original packaging, also in case of moves
or returns.
Do not transport the unit headlong.
Protect the position during transport and pay attention to the centre of mass.
Even in case of UPS with inbuilt batteries it can happen easily that the units fall
down.
During storage also ensure a stable position.
3.3 Installation
The UPS is destined for ventilated rooms.
The installation and assembly of the UPS has to comply with the specified
installation position given by the manufacturer.
If fast temperature changes occur, it is possible that the UPS will be dewed.
Before taking further steps an acclimatization time of at least 2 hours has to be
guaranteed.
Never install the unit in a humid environment. Keep the UPS free of liquids.
Do not install the UPS close to devices which heat excessively.
Ensure that the air slots of the units and the air circulation are not blocked.
3.4 Connection
The UPS just has to be connected to a earth contact socket or in case of
terminal alignment the PE (protective earthing conductor) has to be connected.
In no circumstances the unit is allowed to operate without PE.
The socket has to be easily accessible and close to the UPS. In case of
permanent connection use short cord-lengths.
For the connection of the UPS with the socket only use a cord which is
certificated with the VDE and CE sign. In case of permanent connection use a
corresponding cord.
For the connection of the connected machines with the UPS only use a cord
which is certificated with the VDE and CE sign. In case of permanent
connection of the connected machines use a corresponding cord.
The protection of the connected machines always has to be in front of one
connected machine, never centraly in front of the UPS.
Do not connect the UPS with domestic appliances and hand tools as e.g. fan
heater, vacuum cleaner, boring machine, hardrier, toaster, etc.
