4
AX Li Com BOX (Art.-No. SLAXVTEBMODWX000)
Quick Guide V.1.4
6. Installation and Operation
Install this box after configuration with inverter and lithium battery by following the steps
below.
1. Use the RS485 USB cable with converter to connect the AX Li Com Box and the PC.
2. Use the included RJ45 cable (black) to connect the AX Li Com Box (RS485-BMS) and the RS
485 connection of the lithium battery.
3. Use the supplied RS232 cable (gray) to connect the AX Li Com-Box and the AX inverter.
4. Use supplied RS232 cable (gray) to connect AX Li Com box and the inverter.
5. Switch on the lithium battery.
6. Switch on the inverter.
7. If necessary, start the monitoring software
If all cables have been connected correctly and communication
between the inverter and the battery has been successfully
established, a symbol as shown on the right will flash on the
LCD:
