UPS: OFFICE 400 - 2000
Safety Instructions
OFFICE Series
14
qualified service center after transportation damages. In the case of transporta-
tion damages, there is a high risk that the energy storage units and/or their elec-
trical connections have been affected. As a result, short circuits and/or the leak-
ing of electrolytes cannot be ruled out. For this reason, the unit must be isolated
until an inspection has been performed.
In addition, the device should not be transported or stored upside-down.
2.6
Positioning
Only operate the UPS in well-ventilated rooms, ensuring the specified ambient
temperature range (according to
13 Technical Dat).
The UPS should not be placed in the vicinity of heat sources.
Always take the operating conditions into account when positioning the device.
Maintain the minimum distance to adjacent equipment and walls necessary for
ventilation purposes (see
13 Technical Dat and
5 Installation and Connec-
tion of the UPS ensure that the necessary air circulation is provided.
Never place or operate the device in a moist environment. Liquids must, as a
rule, be kept away from the device.
Due to major temperature differences, condensation or dew effects may occur
after the positioning of the UPS. Therefore, an acclimatization period of at least
two hours must be observed before any further steps are taken. Make sure the
temperature adjustment has been completed and that any surfaces with con-
densation inside and outside the device have completely dried.
Never operate the UPS in a combustible and/or unventilated environment.
2.7
Connection
Always use the connection terminals provided for the purpose of connecting the
UPS.
To avoid electrical hazards, the connection of the unit may only be made under
de-energized conditions.
The PE (protective earth) conductor must be connected without fail. The UPS-
device, as well as the connected loads, must not be used without the PE con-
ductor under any circumstances!
